Scenario 3:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.
Where should the administrator check first to verify if the configuration is correct?

• A. Verify that redistribution between the primary hub site and San Jose is enabled.
• B. Verify the static routes to San Jose from all Branches are configured.
• C. Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.
• D. Verify that the NVS feature is enabled in Cloud VPN.

Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network engineer is configuring an Internet Backhaul Policy for the Chicago Branch to utilize NY's hub as a much better source for Internet for certain SaaS applications. For an unknown reason, the network engineer is not able to select the hubs in the Internet Backhaul Policy.
What could be the reason?

• A. The hub is not configured with the proper IP address.
• B. The Dynamic Branch to Branch has not been enabled.
• C. The Edge's profile does not include Backhaul hubs as an option.
• D. Dynamic Branch to Branch using gateways has not been enabled.

Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A network administrator is trying to create multiple overlays on a single physical interface on an Edge. The administrator is able to bring up only a single overlay so far, but is having trouble with bringing up additional overlays.
What could be the possible reason?

• A. The administrator does not have the right permission to create multiple overlays. The administrator needs to have an Operator-level privilege for this task.
• B. The licensing does not support multiple overlays on a single physical interface.
• C. Multiple overlays cannot be created on a single physical interface. Multiple physical interfaces are needed.
• D. On the WAN overlay configuration, verify the IP address, next-hop, and the VLAN ID configuration.

Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected lo. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

Users are complaining that web pages to certain web sites are very slow to load and at times unresponsive. The network administrator has verified that the traffic is going correctly out the underlay.
What should the administrator check next?

• A. Verify if Path-MTU Discovery is disabled.
• B. Verify if routes to Gateways are present in the Overlay Flow Control (OFC).
• C. Verify the Business Policy flows are matching.
• D. Verify if there is latency, loss, or jitter on the underlay.