最新的Juniper Networks Certified Internet Specialist, Service Provider (JNCIS-SP) - JN0-360免費考試真題
What are two destination addresses used for OSPF link-state update packets? (Choose two.)
正確答案: A,C
Which three statements are true about BGP default operations? (Choose three.)
正確答案: B,C,D
Which forwarding table designation is used to indicate that load balancing is working correctly?
正確答案: D
-- Exhibit --
[edit]
user@router# show routing-options
rib-groups {
test {
import-rib [ walter.inet.0 nancy.inet.0 ];
}
}
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, what is the result of the RIB group configuration?
[edit]
user@router# show routing-options
rib-groups {
test {
import-rib [ walter.inet.0 nancy.inet.0 ];
}
}
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, what is the result of the RIB group configuration?
正確答案: D
In your network, you have two LDP routers connected across four physical interfaces. You have also enabled LDP to operate on all four of those interfaces.
What is the resulting outcome of your configuration between those two routers?
What is the resulting outcome of your configuration between those two routers?
正確答案: B
Which two support the tunneling of IP traffic on Junos devices? (Choose two.)
正確答案: A,C
You are using RSVP in your network to signal MPLS LSPs. You are asked to ensure that the egress MPLS router receives the full label stack, containing both the hop-by-hop and
VPN label.
VPN label.
正確答案: B
Which two IS-IS packet types are used to maintain IS-IS database synchronization? (Choose two.)
正確答案: A,B
-- Exhibit --
{master}[edit]
user@router-RE0# run show task replication
Stateful Replication: Enabled
RE modE. Master
Protocol Synchronization Status
OSPF Complete
RIP Complete
BGP Complete
MPLS Complete
LDP Complete
{master}[edit]
user@router-RE0# run show bgp summary | match 192.168.1.1
1 92.168.1.1 65056 288 327 0 2 1:05 Establ
{backup}[edit]
user@router-RE1# run show system switchover
Graceful switchover: On
Configuration databasE. Ready
Kernel databasE. Ready
Peer statE. Steady State
{backup}[edit]
user@router-RE1# run show bgp summary | find 192.168.1.1
1 92.168.1.1 65056 592 737 3778 2 1:33 Establ
{backup}[edit]
user@router-RE1# run show bgp replication
Synchronization master:
Session statE. Up, SincE. 6d 20:42:51
Flaps: 1, Last flap reason: Commit-sync error
Protocol statE. Idle, SincE. 5d 19:41:52
Synchronization statE. Complete
Number of peers waitinG. AckWait: 0, SoWait: 0, ScheduleD. 0
rsync walk at: inet.0 - , queued 0
Messages sent: Open 1, Establish 7415, Update 17, Error , Complete 48
Messages receiveD. Open 1, Request 1 wildcard 47 targeted, EstablishAck 2827,
CompleteAck 4
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
{master}[edit]
user@router-RE0# run show task replication
Stateful Replication: Enabled
RE modE. Master
Protocol Synchronization Status
OSPF Complete
RIP Complete
BGP Complete
MPLS Complete
LDP Complete
{master}[edit]
user@router-RE0# run show bgp summary | match 192.168.1.1
1 92.168.1.1 65056 288 327 0 2 1:05 Establ
{backup}[edit]
user@router-RE1# run show system switchover
Graceful switchover: On
Configuration databasE. Ready
Kernel databasE. Ready
Peer statE. Steady State
{backup}[edit]
user@router-RE1# run show bgp summary | find 192.168.1.1
1 92.168.1.1 65056 592 737 3778 2 1:33 Establ
{backup}[edit]
user@router-RE1# run show bgp replication
Synchronization master:
Session statE. Up, SincE. 6d 20:42:51
Flaps: 1, Last flap reason: Commit-sync error
Protocol statE. Idle, SincE. 5d 19:41:52
Synchronization statE. Complete
Number of peers waitinG. AckWait: 0, SoWait: 0, ScheduleD. 0
rsync walk at: inet.0 - , queued 0
Messages sent: Open 1, Establish 7415, Update 17, Error , Complete 48
Messages receiveD. Open 1, Request 1 wildcard 47 targeted, EstablishAck 2827,
CompleteAck 4
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
正確答案: A
-- Exhibit --
user@router# show interfaces
xe-0/0/0 {
unit 0 {
family inet {
address 192.168.12.1/24;
}
family mpls;
}
}
xe-0/0/1 {
encapsulation ethernet-ccc;
unit 0 {
family ccc;
}
}
lo0 {
unit 0 {
family inet {
address 1.1.1.1/32;
}
}
}
[edit]
user@router# show protocols
mpls {
interface all;
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface all;
}
}
ldp {
interface all;
}
l2circuit {
neighbor 2.2.2.2 {
interface xe-0/0/1.0 {
}
}
}
-- Exhibit --
Click the Exhibit button.
In the exhibit, which configuration element is missing to bring up the Layer 2 circuit?
user@router# show interfaces
xe-0/0/0 {
unit 0 {
family inet {
address 192.168.12.1/24;
}
family mpls;
}
}
xe-0/0/1 {
encapsulation ethernet-ccc;
unit 0 {
family ccc;
}
}
lo0 {
unit 0 {
family inet {
address 1.1.1.1/32;
}
}
}
[edit]
user@router# show protocols
mpls {
interface all;
}
ospf {
traffic-engineering;
area 0.0.0.0 {
interface all;
}
}
ldp {
interface all;
}
l2circuit {
neighbor 2.2.2.2 {
interface xe-0/0/1.0 {
}
}
}
-- Exhibit --
Click the Exhibit button.
In the exhibit, which configuration element is missing to bring up the Layer 2 circuit?
正確答案: C
Using industry best practices, what is true regarding an external BGP session?
正確答案: C
-- Exhibit --
[edit]
user@router# run show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric
ge-1/0/2.0 3 0x1 router.00 router.00 10/10
lo0.0 0 0x1 Passive Passive 0/0
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are true regarding the GE interface?
(Choose two.)
[edit]
user@router# run show isis interface
IS-IS interface database:
Interface L CirID Level 1 DR Level 2 DR L1/L2 Metric
ge-1/0/2.0 3 0x1 router.00 router.00 10/10
lo0.0 0 0x1 Passive Passive 0/0
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are true regarding the GE interface?
(Choose two.)
正確答案: B,D
Which two statements reflect benefits of performing per-flow load balancing over per- packet load balancing? (Choose two.)
正確答案: B,D
In an RSTP network, which combination of port types can exist on the root bridge?
正確答案: C
Referring to the exhibit,

Which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?

Which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
正確答案: C