最新的HP HP2-Z18免費考試真題

問題1

You must assign a friendly name to port B24 on an HP E5406 zI switch. Given the following prompt, which command must you enter next to complete this task?
E5406#

A. manager

B. name int b24 <name>

C. interface b2 4

D. configure

正確答案: D

問題2

Which A-Series switch is designed for the aggregation layer of data centers?

A. A5800

B. A9500

C. A12508

D. A12518

正確答案: A

問題3

You must design and configure a Spanning Tree solution using HP E-Series switches. Why is it necessary to ensure that all VLANs defined on the switches are carried on all switch-to-switch links?

A. to ensure all switches can exchange BPDUs when ports are in blocking state

B. to ensure all switches can locate a Root Port

C. to ensure all VLANs are part of the Internal Spanning Tree (IST)

D. to ensure all VLANs have redundant paths to the Root Bridge

正確答案: D

問題4

What is the effect of the following command entered at the CLI of an HP E3500 yI switch?
E3500 (config) # timesync sntp

A. The switch will provide SNTP services to all connected VLANs.

B. The switch's clock will be synchronized with a configured SNTP server d.

C. The switch will broadcast for an SNTP server.

D. The switch will use SNTP as its time synchronization protocol

正確答案: D

問題5

You are the network administrator at a company with multiple remote sites. You are using HP ProCurve Manager Plus (PCM+) to manage network devices in all of the company's offices. How can PCM+ remote agents help manage your network?

A. They manage access by remote clients and coordinate communications across subnets.

B. They enforce policies defined on the PCM+ server and discover manageable devices.

C. They detect unauthorized PCM+ servers and quarantine unauthorized switches and hubs.

D. They detect unauthorized PCM+ servers and clients.

正確答案: B

問題6

Refer to the exhibit below.
Which VLAN will be carried untagged on GigabitEthernet 2/0/2?

A. VLAN 102

B. VLAN 101

C. VLAN 100

D. VLAN 1

正確答案: A

問題7

What is a benefit of the customizable airflow feature on the HP E6600 switch series?

A. regulates airflow, based upon the number of active ports

B. controls the volume of airflow

C. relocates the power cord to the other side of the switch for ease of rack mounting

D. ensures the switch's exhaust is directed away from other equipment in data center racks

正確答案: A

問題8

You are designing a wireless network. Why should you choose an Autonomous architecture over Controlled architecture? (Select three.)

A. to provide centralized management of RPs

B. to provide effective coverage of large areas

C. to provide coverage for a smaller, isolated area with only one or a few APs

D. to provide self-sufficient WLAN services, as well as local authentication and the ability to survive a WAN failure

E. to provide fast Layer 2 roaming (< 50 ps) between RPs that are connected to the same Wireless Module

F. to provide wireless bridging from one building to another

正確答案: C,D,F

問題9

What is the rule for IRF ports in an IRF stack on an HP A-Series switch?

A. IRF Port 1 on each switch must be connected to IRF Port 2 on a neighbor

B. IRF Port 1 and IRF Port 2 must be aggregated to provide load balancing.

C. IRF Port 1 and IRF Port 2 must be members of VLANs in MST instances.

D. IRF Port 1 on each switch must be connected to IRF Port 1 on a neighbor.

正確答案: A

問題10

You have defined port 1/0/2 on an HP A7500 switch as a trunk port with VLANS 1, 10, 20, 30 permitted. What is the effect of the following command?
[A7500-GigabitEthernetl/0/2] port trunk pvid vlan 30

A. The port will carry VLAN 30 as an untagged VLAN; all others will be tagged.

B. The port will preconfigure as a hybrid port carrying VLAN 1 and VLAN 30 as untagged VLANs.

C. The port will be added to VLAN 30 as a tagged member.

D. The port will use VLAN 30 as its default VLAN and wi II no longer forward VLAN 1 packets

正確答案: A

最新的HP Network Infrastructure AIS 2011 - HP2-Z18免費考試真題

聯系我們

站內鏈接

最新更新