購買前免費試用

GB0-371-ENU學習資料為消費者提供免費試用服務。如果您對我們的學習資料感興趣，您只需要進入我們的官方網站，您就可以免費下載並體驗我們的試用問題庫。通過試用，您將在GB0-371-ENU考試指南中獲得不同的學習經歷，您會發現我們所說的不是謊言，您將立即愛上我們的產品。作為您成功的關鍵，我們的學習材料可以為您帶來的好處不是靠金錢衡量的。 GB0-371-ENU測試題庫：Constructing H3C High-Performance Campus Networks不僅可以幫助您通過考試，還可以幫助您掌握一套新的學習方法，並教您如何高效學習，我們的學習材料將引領您走向成功。

模擬考試功能

GB0-371-ENU學習資料的內容全部由行業專家根據多年來的考試大綱和行業發展趨勢編制而成。它與市場上問題庫的內容不重疊，避免了反复練習引起的疲勞。 GB0-371-ENU考試指南不是一個拼湊的測試題，而是有自己的系統和層次結構，可以使用戶有效地提高效率。我們的學習材料包含由考試專家根據不同科目的特點和範圍編寫的試題。模擬真實的Constructing H3C High-Performance Campus Networks測試環境。測試結束後，系統還會給出總分和正確率。

無論您是新人還是具有更多經驗老手，GB0-371-ENU學習材料都將是你們的最佳選擇，因為這是我們的專業人士根據多年來的考試大綱和行業趨勢的變化進行編輯的。 GB0-371-ENU測試題庫：Constructing H3C High-Performance Campus Networks不僅可以幫助您提高學習效率，還可以幫助您將復習時間從長達幾個月縮短到一個月甚至兩三週，這樣您就可以使用最少的時間和精力獲得最大提升。

DOWNLOAD DEMO

考試前只需20-30小時的學習時間

在此之前，您可能需要數月甚至一年的時間來準備專業考試，但使用GB0-371-ENU考試指南，您只需要在考試前花費20-30小時進行複習即可。並且使用我們的學習材料，您將不再需要任何其他復習材料，因為我們的學習材料已包含所有重要的測試點。與此同時，GB0-371-ENU學習材料將為您提供全新的學習方法 - 讓您練習過程中的掌握知識。有許多人因閱讀書籍而感到頭疼，因為裡面有很多難以理解的知識。與此同時，教科書中那些無聊的描述常常讓人感到困倦。但是使用GB0-371-ENU測試題庫：Constructing H3C High-Performance Campus Networks，你將不再有這些煩惱。

最新的 H3CSE-Routing & Switching GB0-371-ENU 免費考試真題:

1. In the switching network as shown in the figure, all three switches have only default VLAN1, the interconnection ports of the three switches are Trunk, and all VLANs are allowed to pass, and the three switches have the global and port GVRP function enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet1/0/1 port is set to Forbidden on the switch SWA, and the display vlan command is executed on the SWB to view the VLAN existing on VL^SWB Yes (choose one or more)

A) VLAN1
B) VLAN20
C) VLAN 10

2. In the switching network as shown in the figure, all three switches only have the default VLAN1, the interconnection ports of the three switches are trunks, and all VLANs are allowed to pass, and the three switches have the global and port GVRP functions enabled. VLAN 10 is created on the switch SWA, VLAN 20 is created on the switch SWC, and the GVRP registration mode of the Ethernet 1/0/1 port is set to Fixed on the switch SWA, and the display vlan command is executed on the SWB to view the VLAN existing on VLASWB ( Select one or more)

A) VLAN1
B) VLAN20
C) VLAN 10

3. Which statement about the principle of SmartLink & Monitor Link is correct?

A) SmartLink is a port linkage solution that monitors the device uplink. Follow the Up/Down status change of the uplink to trigger the Up/Down change of the downlink
B) MonitorLink realizes the redundant backup of the main and backup links, and enables the traffic to be quickly switched to the backup link after the main link fails
C) SmartLink sends Flush messages to notify other devices to refresh MAC address forwarding entries and ARP entries
D) MonitorLink sends Flush messages to notify other devices to refresh MAC address forwarding entries and ARP entries

4. As shown in the networking, SWB and SWC enable STP, SWC is the root, SWA does not enable STP, initially Link 2 is not connected, PCB can send data to PCA, if Link 1 fails at this time, maintenance personnel will link 2 is connected, the statement about the recovery process of the PCB to PCA data transfer service is correct (assuming that the PCA will not actively send data)

A) SWB port E0/1 needs to wait for the default 30 seconds to enter the forwarding state, so the business recovery from PCB to PCA requires a total of 30 seconds by default
B) The SWB port E0/1 enters the Forwarding state to trigger the topology change process, which shortens the MAC address aging time, so the business recovery from PCB to PCA requires a total of 45 seconds by default.
C) SWA port E0/1 will not send TCN BPDUs to SWC after the link is interrupted
D) Since SWA does not enable STP, service recovery needs to wait for the MAC address of SWC to age, which takes 300 seconds by default

5. In the switching network as shown in the figure, VLAN10 is set as Isolate-user-vlan on the switch SWA, VLAN2 and VLAN3 are the Secondary VLAN of VLAN 10; VLAN2? VLAN20 is created on the switch SWB, and VLAN20 is set as Isolate-user-vlan , VLAN4 is the Secondary VLA of VLAN20. After setting the IP address of each device as shown in the figure, you can judge

A) PCC can communicate with PCB
B) PCC can communicate with SWB
C) PCC can communicate with SWA
D) PCC can communicate with PCA

問題與答案：