最新的Pure Storage FlashArray-Implementation-Specialist免費考試真題

問題1

A customer has purchased a FlashArray//XL. What power cables are required in order to connect this array to rack PDUs?

A. 4 x C13/14

B. 2 x C13/14

C. 4 x C19/20

正確答案: C

說明：（僅 Fast2test 成員可見）

問題2

A customer wants to expand the capacity of their FlashArray//X10 from 5/5 to 11/11. Which is the correct action to take?

A. Perform a drive-by-drive swap of the modules.

B. Evacuate and swap one pack at a time.

C. Install a swing shelf with loan capacity to evacuate to.

正確答案: C

說明：（僅 Fast2test 成員可見）

問題3

An Implementation Engineer is deploying a FlashArray//XLR5 with two DirectFlash Shelves. The engineer wants to ensure the shelves are installed in the preferred PCIe slots to achieve optimal performance and support. Which PCIe slots should the Implementation Engineer use for connecting the DFS shelves?

A. PCIe slot 1 for SH9, PCIe slot 7 for SH8

B. PCIe slot 0 for SH8, PCIe slot 8 for SH9

C. PCIe slot 0 for SH9, PCIe slot 6 for SH8

正確答案: C

說明：（僅 Fast2test 成員可見）

問題4

An Implementation Engineer has completed a hardware NDU, but after the upgrade, Purity reports a "health not responding" status when running status. Before contacting support, which command should the Implementation Engineer run to review a list of possible logged issues?

A. puremessage list --open --hidden

B. purearray diagnose --log

C. purealert watcher list

正確答案: A

說明：（僅 Fast2test 成員可見）

問題5

If drives need to be relocated within an array for an XFORM upgrade, when should this be completed?

A. The following day

B. During the upgrade

C. After upgrade is completed

正確答案: C

說明：（僅 Fast2test 成員可見）

問題6

A customer has submitted a Pure Engagement Request (PER) / Implementation Workbook (IWB) and the stated array name is "123".
What is the issue with this array name?

A. Array name must be 4 characters or more.

B. Array name must be alphanumeric.

C. Array name cannot contain hyphens.

D. Array name cannot start with a digit.

正確答案: D

說明：（僅 Fast2test 成員可見）

問題7

An Implementation Engineer is assigned to install a 4X Module 9.1 TB Conversion Kit in a Flash Array Chassis. Why are there only four Direct Flash Modules?

A. To fill out enclosure bays.

B. To replace a missing shipment.

C. To widen an existing write group.

正確答案: C

說明：（僅 Fast2test 成員可見）

問題8

After completing an installation, the customer requests to configure replication IP settings. Where in the GUI does the customer need to navigate in order to do this?

A. Storage > Replication

B. Settings > Network

C. Storage > Array Connections

D. System > Configuration

正確答案: B

說明：（僅 Fast2test 成員可見）

問題9

What are the interface names for a 4-port FC card in slot 1 in an XR2/3 array?

A. FC0, FC1, FC2, and FC3

B. FC4, FC5, FC6, and FC7

C. FC5, FC6, FC7, and FC8

正確答案: B

說明：（僅 Fast2test 成員可見）

問題10

An Implementation Engineer is scheduled to install a FlashArray and a DirectFlash Shelf (DFS). What action should the Implementation Engineer perform?

A. Only upgrade the Purity on the FlashArray and then attach the DFS.

B. Refer to the "Recommended DFS Versions for Purity Releases" KB and upgrade Purity on the FlashArray and DFS.

C. Install the Array and DFS with the Purity that shipped and have Support upgrade remotely.

正確答案: B

說明：（僅 Fast2test 成員可見）

問題11

Which power cable receptacle type does the FlashArray//X accessory kit contain?

A. C13 to C20

B. C13 to C14

C. C14 to C15

D. C19 to C20

正確答案: B

說明：（僅 Fast2test 成員可見）

最新的Pure Storage Certified FlashArray Implementation Specialist - FlashArray-Implementation-Specialist免費考試真題

聯系我們

站內鏈接

最新更新