最新的IBM C4040-121免費考試真題

問題1

A customer has a single-partition Power 720 running IBM i. They would like to install some additional adapters and implement 5 additional partitions. In addition to installing the adapters and configuring an HMC, what else is necessary?

A. Create a new partition and profile for the original LPAR with only the resources the partition
needs. Create partitions and profiles forth additional partitions.
Delete the original partition.
Suspend the existing partition.

B. Modify the existing partition profile to not "use all resources in system" and own only what it
needs. Reactivate the profile.
Create partitions and profiles for the additional partitions.

C. Modify the profile of the existing partition and concurrently enable it.
Resume the existing partition.
Create partitions and profiles for the additional LPARs.

D. Configure the new partitions.
Activate the new profiles to remove "required" features of the existing partition.

正確答案: A

問題2

A customer would like to share a tape adapter between two partitions. The time of day which the save completes varies significantly on one of the partitions. What is the most appropriate way to move the tape resource to avoid failures and resource contention?

A. Use a repeating scheduled job on the HMC to move the I/O resource.

B. Use a script to be run from the partitions to access the HMC and move the I/O resource after the saves have completed.

C. Schedule the activation of a different profile on the HMC to allow for "desired"resources to become "required."

D. Afterverifyingthe save has completed, manually move the I/O resource to the next partition profile on the HMC.

正確答案: B

問題3

What are two methods to determine the partition to which virtual disks are assigned?

A. In VIQ Server, use the Isctg -vI command In IBM i, use the WRKHWDRSC *STG command

B. In VIO Server, use Ispv-AvI In the HMC command line, use Isvdev-p

C. In VIO Server, use the Ismap command In the HMC GUI use Virtual Resources/Virtual Storage Management

D. In VIO Server, use Isdev-v command In IBM i, use WRKCFRGSTS *DEV* VRT

正確答案: C

問題4

A system administrator has configured 3 partitions, each using 1 of 3 shared processor pools. All are active and working as designed.
One of the partitions using one of the shared processor pools will be shut down and the resources allocated to the other 2 pools.
Which is the correct sequence of actions to accomplish the goal?

A. Create a new shared-processor pool.
Merge all three shared-pools into the new pool using Live Partition Mobility
Shut down and remove the partition definition.

B. Shut down the partition that is using the shared processor pool.
Change the maximum processing units to zero.
Assign the processor capacityto another pool.

C. Change the minimum processor for the partition to zero.
Shut down the partition by deactivating it from the HMC.
Delete the shared-processor pool.

D. Merge the shared-processor pool to be removed into one of the other pools.
Shut down the partition by deactivating it from the HMC.
Plush the memory cache by deactivating the shared-processor pool.
Delete the shared-processor pool.

正確答案: B

問題5

A client plans to add a Power 770 server to a POWEP6 environment. What resource can the administrator use to determine if the HMC is at the correct level to support the new server firmware?

A. System Planning Tool

B. HMC Service Agent

C. ASMI

D. Power Code Matrix

正確答案: D

問題6

On an HMC under Systems Management and Servers there are three servers listed. One of them shows "no connection." The HMC can ping the configured ESP address. The server has power and the front panel displays HMC=0 in the lower left.
Which action is valid for this connection?

A. Operations-> Launch ASM

B. Operations-> Power On

C. Operations-> Change Password

D. Properties

正確答案: A

問題7

A customer has multiple POWERS 570 servers. The servers are controlled by multiple HMCs. The customer is installing an additional Power 770 server in this environment but will retain their existing HMCs. No updates to FSP or HMC levels have been made since installation of the POWERS servers.
After reviewing the cover letters for ESP and HMC firmware levels, what updates are required to support the addition of the new server into the network?

A. Update the FSP5 and HMC5 of the existing systems to the minimum level required.

B. Update only the FSPs to the latest release available.

C. Update only the HMCs to the latest version.

D. Update the POWERS ESPs to the most recent version available for the installed firmware release. Update the HMCs to the most recent release available.

正確答案: A

問題8

What type of Ethernet adapter is supported in an IBM i partition when using Live Partition Mobility?

A. Virtual Ethernet Adapter

B. Host Ethernet Adapter (HEA)

C. EtherChannel Adapter

D. Shared Ethernet Adapter (SEA)

正確答案: A

問題9

What is the correct method to install a firmware update on a single-image system?

A. Install the appropriate firmware PTF package to the IBM i partition and IPL the partition.

B. Load the firmware CD to the optical drive and perform a LODRUN operation.

C. Download the firmware and burn it to a CD, then perform a D-side manual IPL.

D. From the DSPEMWSTS screen, use the function to "Update firmware from service machine."

正確答案: A

最新的IBM Virtualization Technical Support for IBM i -v1 - C4040-121免費考試真題

聯系我們

站內鏈接

最新更新