最新的IBM Assessment: Virtualization Technical Support for IBM i -v1 - A4040-121免費考試真題
A client partition has disk storage provided by two different hosting partitions. What method of disk protection on the client partition will help ensure that the client partition remains running in the event one of the hosting partitions becomes unavailable?
正確答案: B
A customer with an IBM i environment running on a 6-core Power 720 wants to add an additional IBM i workload in a new partition. The customer is licensed for4 cores to run IBM i, and the existing LPARs are using 3.
Maximum internal DASD is currently installed in the CEO and is being used for production. The customer has a V7000 storage subsystem with available capacity and an available slot for a fibre adapter.
Which option would allow the customer to use some of the remaining processing capabilities of their Power 720 but attach to disk storage elsewhere?
Maximum internal DASD is currently installed in the CEO and is being used for production. The customer has a V7000 storage subsystem with available capacity and an available slot for a fibre adapter.
Which option would allow the customer to use some of the remaining processing capabilities of their Power 720 but attach to disk storage elsewhere?
正確答案: A
An administrator plans to use Live Partition Mobility on their two Power 740 systems. What is required for this environment?
正確答案: B
A customer would like to implement a client Linux partition on their Power Systems server. There are no available physical network ports on the system.
In addition to configuring the virtual Ethernet adapters in a hosting IBM i partition, what must be configured to allow the client Linux partition to access the network?
In addition to configuring the virtual Ethernet adapters in a hosting IBM i partition, what must be configured to allow the client Linux partition to access the network?
正確答案: A
An administrator has configured a POWER7 server with 6 partitions. The partitions are configured with shared processor pools and virtual processors as shown:
The IBM i partition configured to use virtual processor capacity indicated in the graphic above as vp8 is currently shut down, but the administrator needs to reserve the shared processor pool capacity for use with the IBM i partition once it starts up.
Which action will accomplish the goal?
The IBM i partition configured to use virtual processor capacity indicated in the graphic above as vp8 is currently shut down, but the administrator needs to reserve the shared processor pool capacity for use with the IBM i partition once it starts up.
Which action will accomplish the goal?
正確答案: B
A Power Systems server, running AIX, Linux and IBM i partitions, encounters performance problems.
To investigate the problem, the administrator wants to collect high-level cross-partition performance data from an IBM i partition.
What is required?
To investigate the problem, the administrator wants to collect high-level cross-partition performance data from an IBM i partition.
What is required?
正確答案: C
Which VIO Server command lets an administrator enter a non-restricted root shell to allow environment setup and installation of vendor software?
正確答案: A
On an HMC under Systems Management and Servers there are three servers listed. One of them shows "no connection." The HMC can ping the configured ESP address. The server has power and the front panel displays HMC=0 in the lower left.
Which action is valid for this connection?
Which action is valid for this connection?
正確答案: A
A client IBM i 7.1 partition has its disk provided by another IBM i partition, and owns a physical network adapter.
The host partition is put into restricted state.
What happens to the client partition?
The host partition is put into restricted state.
What happens to the client partition?
正確答案: D
A client IBM i partition is implemented across two VIO Servers (VIOS) and the network is configured with SEA failover.
VlQS-1 is configured as the primary network path, and VIOS-2 as the secondary.
When VIOS-1 is removed for maintenance purposes, the client IBM i partition network traffic moves to VIOS-2.
What is the result when VIOS-1 returns to a running state?
VlQS-1 is configured as the primary network path, and VIOS-2 as the secondary.
When VIOS-1 is removed for maintenance purposes, the client IBM i partition network traffic moves to VIOS-2.
What is the result when VIOS-1 returns to a running state?
正確答案: A