最新的Avaya 7003.1免費考試真題

問題1

A field calls about a problem enabling the DSPs on a new Communication Server (CS) 1000E SA Co-resident on release 7x. The DSPs on the MG 1 are all enabled but enabling the DSPs on MG2 and MG3 fail, and asked that the configuration be reviewed.
MG1: CPMG 128
MG2: MGC 128 DSP DB in position 2
MG3: MGC 128 DSP DB in position 2
After reviewing the configuration, an error in the DSP 128 VGW (DSP) configuration is identified?
Which configuration option accurately reflects the proper configuration for the voice Gateway (DSP) channel?

A. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 02 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

B. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 00 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

C. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 11 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

D. Numbering of VGW channels: 128 Trunk data block VGW Terminal number: 004 0 01 0 Designator field for trunk: DSP Extended trunk DSP DB 128 Customer number: 00

正確答案: C

問題2

A customer with an existing Option 11C Rls. 5.5 chassis system plans to upgrade to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single IP Media Gateway (MG) 1000E chassis.
To complete the upgrade, which component in the Option 11C must be replaced?

A. Digital Line Card

B. Call Processor

C. Media Gateway

D. SSC Card

正確答案: D

問題3

A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?
Which overlay is used to configure the MGC SDI ports?

A. LD 17

B. LD 97

C. LD 137

D. LD 117

正確答案: A

問題4

You are installing a new Communication Server 1000E (CS 1000E) SA release 7x system for your customer. They have asked you to implement the corporate Directory Feature during the installation.

A. SFTP must be disabled in LD 117.

B. Valid telephony accounts must already exist in Subscriber Manager.

C. Centralized authentication must be disabled.

D. The CS 1000E Call Server must be joined to security domain.

正確答案: D

問題5

A technician is planning to upgrade a customer's existing Communication Server 1000E Rls. 6.0 system. During the upgrade, a CPPM server card from storage will be added to provide an additional signaling server.
Which two statements describes what must be done to the CPPM server card to distinguished it as a signaling Server (Choose two)

A. Install one Compact Flash Drive (RMD) and one Hard Drive (FMD)

B. Set switch 5 to position 1.

C. Install one Compact Flash Drives (one RMD and one FMD)

D. Set switch 5 to position 2.

正確答案: A,D

說明：（僅 Fast2test 成員可見）

問題6

A Communication Server (CS) 1000E Rls. 7x customer has decided to implement UNIStim security with DTLS.
Which statement regarding UNIStim security with DTLS is true?

A. It provides security between the Ip telephone and Call Server.

B. It encrypts UNIStim signaling between the line Terminal Proxy Server and IP telephones.

C. It is provided by the Secure Multimedia Controller 2450.

D. It provides media security between the IP telephones.

正確答案: B

問題7

A customer is implementing a Communication Server 1000E (CS 1000E) Rls. 7x High Availability (HA) system. The customer wants to know if there are any special package requirements beyond the HA Package needed for the system.
Which two software packages are mandatory when deploying a CS 1000E system? (Choose two)

A. SOFTSWITCH-Soft Switch Package 402

B. SBO - Branch Office Package 390

C. SIP - SIP Gateway and Converged Desktop Package 406

D. IPMG - Media gateway 1000E package 403

正確答案: C,D

最新的Avaya Communication Server 1000 for Avaya Aura Implementation - 7003.1免費考試真題

聯系我們

站內鏈接

最新更新