最新的Cisco Implementing Cisco Data Center Unified Computing - 642-999免費考試真題

A. FCoE VLANs may overlap with Ethernet VLANs.

B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System
Manager.

C. Each VSAN requires a dedicated VLAN to carry FCoE traffic.

D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.

A. Adapter FEX extends the fabric down to the FEX port.

B. Adapter FEX extends the fabric down to the VM.

C. Adapter FEX extends the fabric into the hypervisor.

D. Adapter FEX extends the fabric into the server.

A. the Device Manager in Cisco Prime Data Center Network Manager

B. the multiprotocol port on the Cisco storage

C. the Cisco Nexus 2232PP FEX

D. the Cisco UCS 2208XP IOMs

E. the Cisco UCS Manager

F. the Cisco UCS VIC adapter that has VM-FEX and Adapter FEX technology

A. storage module

B. Cisco Integrated Management Controller

C. Cisco UCS Manager

D. fabric interconnect

E. Ethernet uplink

F. chassis

G. adapter

H. I/O module

A. remove chassis

B. decommission chassis

C. acknowledge chassis

D. reset CMOS

A. a whilelist that specifies the servers allowed to access the Cisco IMC

B. user-configured ACLs to block known bad servers from accessing the Cisco IMC

C. 802.1x support, allowing the Cisco IMC to log in to a port security network

D. protection against DDoS on the Cisco IMC

A. eth-server

B. eth-traffic-mon

C. eth-storage

D. eth-uplink

A. Cisco Nexus 1000v is not enabled for the virtual switch.

B. An active VM is not associated with the port profile.

C. VM-FEX does not work with Hyper-V.

D. Hyper-V requires Cisco UCS Manager to utilize Cisco Discovery Protocol on the vNIC profile.

E. SR-IOV is not enabled for the virtual switch inside Hyper-V.

F. VM-FEX has been configured on the Catalyst switch but not in System Center yet.

A. ucs-c250 / # scope cimc
ucs-c250 /cimc # scope tech-support
ucs-c250 /cimc/tech-support # set path default.tar.gz
ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /cimc/tech-support *# commit

B. ucs-c250 / # scope fault
ucs-c250 /fault # scope tech-support
ucs-c250 /fault/tech-support # set path default.tar.gz
ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /fault/tech-support *# commit

C. ucs-c250 / # scope system
ucs-c250 /system # scope tech-support
ucs-c250 /system/tech-support # set path default.tar.gz
ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /system/tech-support *# commit

D. ucs-c250 / # scope support
ucs-c250 /support # scope tech-support
ucs-c250 /support/tech-support # set path default.tar.gz
ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45
ucs-c250 /support/tech-support *# commit

A. The VM last passed traffic more than 5 minutes ago.

B. The link between the fabric interconnect and IOM is offline.

C. The VM is misconfigured.

D. The VN link policy has been set for auto-deletion during a vMotion event.

E. The VM traffic is being sent to a SPAN

F. The VM has been offline for more than 15 minutes.

G. vCenter is offline.

H. The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.

A. local disk policy

B. host firmware policy

C. maintenance policy

D. BIOS policy

A. It can have a unique pin group assigned to it.

B. It can have any VLAN allowed on it.

C. It can have only the overlays native VLAN associated to it.

D. It can be assigned a unique MAC address.

A. Apply a port profile (port group) to the virtual machines on the VMware vCenter server.

B. Apply a fabric profile to both Cisco Fabric Interconnect uplink ports.

C. Define the virtual machine port profile in the Cisco UCS Manager for virtual machine traffic.

D. Install and register the VMware VM Console plug-in in the Cisco UCS Manager.

E. Install and register the Cisco UCS Manager extension as a plug-in in the VMware vCenter.

F. Apply the Firewall Services Module UCS service profile to Cisco UCS B-Series Blade
Server.