準備考試最怕漫長的等待,Fast2test 深諳這一點。642-885 題庫在付款完成後一分鐘內即送達您的信箱,Cisco Deploying Cisco Service Provider Advanced Network Routing 的 131 道練習題立刻就能開始使用。
Cisco 642-885 考試概覽:
| 認證廠商: | Cisco |
|---|---|
| 考試名稱: | 部署思科服務供應商進階網路路由(SPROUTE) |
| 考試代碼: | 642-885 |
| 支援語言: | 英文 |
| 考試形式: | 選擇題, 模擬情境試題 |
| 相關認證: | 思科認證互聯網專業人員(CCIP) |
| 考試時間: | 75-90 |
| 範例考題: | Cisco 642-885 範例考題 |
| 考試方式: | 透過Pearson VUE辦理的監考式考試(思科歷史認證考試執行模式)。 |
| 必備條件: | 建議先具備CCNA等級的網路知識,以及服務供應商路由的基礎概念。 |
Cisco 642-885 考試大綱主題:
| 章節 | 目標 |
|---|---|
| 主題 1: MPLS與進階服務供應商概念 | - 標籤交換與轉送行為 - MPLS架構簡介 |
| 主題 2: 服務供應商路由基礎知識 | - 服務供應商網路中的IP路由架構 - 路由選取與轉送概念 |
| 主題 3: 路由重新分配與原則控制 | - 路由對照表與依原則路由 - IGP與BGP之間的路由重新分配 |
| 主題 4: 內部閘道通訊協定(IGP) | - 服務供應商網路中的OSPF設計與最佳化 - IS-IS的建置與運作 |
| 主題 5: 服務供應商網路中的BGP | - BGP對等連線與路由交換 - 擴充性與收斂效能考量 - 路由原則、過濾與路徑控制 |
642-885 考試熱門問答集
Cisco Deploying Cisco Service Provider Advanced Network Routing(考試代碼 642-885)是 Cisco 官方規劃的認證考試,通過後可取得「思科認證互聯網專業人員(CCIP)-服務供應商方向(歷史認證)」認證,認證等級為 專業級。此認證亦與 思科認證互聯網專業人員(CCIP) 等認證相互關聯,可依職涯規劃進一步進修。若您正準備這門考試,Fast2test 收錄的 131 道練習題能協助您有系統地複習每個知識要點。
建議先具備CCNA等級的網路知識,以及服務供應商路由的基礎概念。由於官方可能隨時調整報考規定,建議您報名前再至 Cisco 官方網站確認最新資訊,以免影響報名資格。
642-885 考試可透過以下官方管道報名:
本考試的考試方式為:透過Pearson VUE辦理的監考式考試(思科歷史認證考試執行模式)。。
完成報名後,建議儘早開始使用 Fast2test 的練習題規劃複習進度,讓備考節奏更從容。
有的,Cisco 官方針對 642-885 提供下列推薦培訓資源:
官方課程適合建立觀念基礎,課後再搭配 Fast2test 的 131 道 642-885 練習題反覆演練,複習效果會更加完整。
可以。Fast2test 提供 Cisco Deploying Cisco Service Provider Advanced Network Routing 的免費範例試題,您可先下載體驗題目品質與解析方式,滿意後再決定購買。購買後享有 365 天免費更新,期間題庫有任何修訂都可免費取得最新版本;即使產品過期,後續續購更新仍可享 50% 折扣優惠。
交付方面,Fast2test 採即時交付:付款完成後一分鐘內,下載資訊即寄送至您的電子郵件信箱,若 2 小時內仍未收到可聯絡客服協助,且產品不限制安裝的電腦數量。考試方面,我們提供退款保證:購買後 60 天內參加對應考試而未通過者,可於考後 2 天內提交報名證明(准考證)影本與官方成績單(Score Report)PDF 申請全額退款,我們會在 7 天內處理完成;考生姓名須與付款人姓名一致,購買後 3 天內即應考、已下載但未實際應考,以及免費資料與過期訂單均不適用。若您不想退款,也可選擇免費更換為兩個等值考試資料,並保留原購產品的更新服務。
642-885 考試共劃分為 5 個主要領域,包括 路由重新分配與原則控制、服務供應商網路中的BGP、MPLS與進階服務供應商概念 等。各領域的完整細項與說明請參考上方的考試大綱,建議您依各領域的佔比高低安排複習比重,把時間花在最關鍵的主題上。
最新的 CCNP Service Provider 642-885 免費考試真題:
A junior network engineer has just configured a new IBGP peering between two Cisco ASR9K PE routers in the network using the loopback interface of the router, but the IBGP neighborship is not able to be established. Which two verification steps will be helpful in troubleshooting this problem? (Choose two.)
- A. Verify that the loopback interfaces are reachable over the IGP
- B. Verify that the UDP port 179 traffic is not being blocked by an ACL or firewall between the two IBGP peers
- C. Verify that the update-source loopback command under the BGP neighbor is configured correctly on each router
- D. Verify that the ibgp-multihop command under the BGP neighbor is configured correctly on each router
- E. Verify that the ttl-security command under the BGP neighbor is configured correctly on each router to enable the router to send the BGP packets using a proper TTL value
- F. Verify that the network command under router BGP is configured correct on each router for announcing the router's loopback interface in BGP
答案:A,C 🗳️
Refer to the Cisco IOS-XR BGP configuration exhibit.
Identify two configuration errors. (Choose two.)
- A. The passall route policy is wrong
- B. The maximum-prefix 10 configuration should be configured under the af-group abc instead of the neighbor-group efg
- C. The neighbor-group efg is missing the ebgp-multihop 2 configuration
- D. The route-policy passall in and route-policy passall out commands should be configured under the neighbor-group efg instead of the af-group abc
- E. The ttl-security configuration command is missing the option to set the number of hops
答案:A,B 🗳️
說明:(僅 Fast2test 成員可見)
When implementing interdomain multicast routing, which mechanism can be used to advertise multicast sources in one domain to the other domains, allowing the RPs to build interdomain multicast distribution trees?
- A. Auto RP
- B. MSDP
- C. MLD
- D. PIM
- E. Multiprotocol BGP
- F. BSR
答案:B 🗳️
說明:(僅 Fast2test 成員可見)
R1 is designated as the PIM RP within the SP core. Which two configuration parameters must be used to enable and activate R1 as the BSR and RP for the core environment? (Choose two.)
- A. ip pim rp-candidate loopback0
- B. ip pim bsr-candidate loopback0
- C. ip pim send-rp-discovery loopback0 scope 16
- D. ip pim send-RP-announce loopback0 scope 16 group-list 1
- E. ip pim send-rp-announce loopback0 scope 16
答案:A,B 🗳️
Which four statements are correct regarding MSDP configurations and operations? (Choose four.)
- A. SA messages are flooded to all other MSDP peers without any restrictions
- B. MSDP establishes neighbor relationships with other MSDP peers using TCP port 639
- C. SA messages are used to advertise active sources in a domain
- D. MSDP peerings on Cisco IOS, IOS-XE, and IOS-XR support MD5 or SHA1 authentication
- E. On Cisco IOS, IOS-XE, and IOS-XR, the router can be configured to cache the SA messages to reduce the join latency
- F. The MSDP peers are also typically the RPs in respective routing domains.
答案:B,C,E,F 🗳️
說明:(僅 Fast2test 成員可見)
0條客戶評論客戶反饋 (*一些類似或舊的評論已被隱藏。)
立即下載 642-885
付款後,我們的系統會在付款後壹分鐘內將您購買的產品發送到郵箱。如2小時內未收到,請與我們聯系。
365天免費更新
購買後365天內可免費升級。365天之後,您將獲得50%的更新折扣。
退款保證
如果您在購買後60天內沒有通過相應的考試,可以全額退款。並且免費獲得任何其他產品。
安全與隱私
我們尊重客戶的隱私。 我們使用McAfee的安全服務為您的個人信息提供最高安全性,讓您高枕無憂。




