最新的Cisco Implementing Cisco Enterprise Advanced Routing and Services - 300-410免費考試真題
A company Is redesigning WAN infrastructure so that all branch sites must communicate via the
head office and the head office can directly communicate with each site independently. The
network engineer must configure the head office router by considering zero-touch technology
when adding new sites in the same WAN infrastructure.
Which configuration must be applied to the head office router to meet this requirement?
head office and the head office can directly communicate with each site independently. The
network engineer must configure the head office router by considering zero-touch technology
when adding new sites in the same WAN infrastructure.
Which configuration must be applied to the head office router to meet this requirement?
正確答案: A
How does an MPLS Layer 3 VPN differentiate the IP address space used between each VPN?
正確答案: B
說明：（僅 Fast2test 成員可見）
Refer to the exhibit. The default route from R1 must be withdrawn from the routing table if R1
cannot ping 10.1.1.1, but it is not working correctly. Which configuration resolves the issue?
cannot ping 10.1.1.1, but it is not working correctly. Which configuration resolves the issue?
正確答案: A
A network engineer needs to verify IP SLA operations on an interface that shows on indication of
excessive traffic. Which command should the engineer use to complete this action?
excessive traffic. Which command should the engineer use to complete this action?
正確答案: C
An engineer creates a Cisco DNA Center cluster with three nodes, but all the services are
running on one host node.
Which action resolves this issue?
running on one host node.
Which action resolves this issue?
正確答案: C
Which feature of the Cisco DNA Center allows you to run diagnostic CLI commands to the
devices that are managed by DNA Center for troubleshooting purposes?
devices that are managed by DNA Center for troubleshooting purposes?
正確答案: C
Which protocol does VRF-Lite support?
正確答案: C
Refer to the exhibit. Redistribution is enabled between the routing protocols, and now PC2 PC3,
and PC4 cannot reach PC1. What are the two solutions to fix the problem? (Choose two.)
and PC4 cannot reach PC1. What are the two solutions to fix the problem? (Choose two.)
正確答案: A,B
說明：（僅 Fast2test 成員可見）
Which IPv6 security feature blocks all traffic from an IPv6 host when initially connecting to a
switch port except for traffic to gain an IPv6 address and discover IPv6 neighbors?
switch port except for traffic to gain an IPv6 address and discover IPv6 neighbors?
正確答案: A
Refer to the exhibit. A network administrator successfully logs in to a switch using SSH from a
RADIUS server. When the network administrator uses a console port to access the switch, the
RADIUS server returns shell:priv-lvl=15" and the switch asks to enter the enable command.
When the command is entered, it gets rejected.
Which command set is used to troubleshoot and resolve this issue?
RADIUS server. When the network administrator uses a console port to access the switch, the
RADIUS server returns shell:priv-lvl=15" and the switch asks to enter the enable command.
When the command is entered, it gets rejected.
Which command set is used to troubleshoot and resolve this issue?
正確答案: D
LAB SIMULATION 8
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the
tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Do not replace existing routing policies or configurations.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
Troubleshoot R-WEST to achieve the desired results:
1. All the commands should be locally saved to the router as well as sent to the Syslog server
except passwords.
2. All the Cisco OSPF LSA traps should be sent to the SNMP server.
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the
tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Do not replace existing routing policies or configurations.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
Troubleshoot R-WEST to achieve the desired results:
1. All the commands should be locally saved to the router as well as sent to the Syslog server
except passwords.
2. All the Cisco OSPF LSA traps should be sent to the SNMP server.
正確答案:
What are two characteristics of a VRF instance? (Choose two.)
正確答案: A,C
說明：（僅 Fast2test 成員可見）