最新的Motorola Solutions MSC-111免費考試真題

問題1

Scenario

Row 19 of the Project Description Template is related to Bandwidth Requirements and what throughput is needed in various sections of the coverage area. Based on the information provided, which of the following best represents the Bandwidth Requirements and throughput needs?

A. 500Kbps

B. 50Kbps

C. 300Kbps

D. 1Mbps

正確答案: C

問題2

When planning a new PMP deployment, the allowable EIRP (Equivalent Isotropic Radiated
Power) regulatory restriction will impact which of the following?

A. The number of AP's allowed at a particular site

B. The maximum throughput available per AP

C. The allowable mounting distance between AP's at a site

D. The coverage distance per AP

正確答案: D

問題3

How can you design a FTP800 link with asymmetric capacity?

A. By acquiring different capacity upgrade keys for each modem.

B. By modifying the uplink/downlink ratio

C. Microwave links can not be asymmetric

D. By using the optical Gigabit interface

E. By using different channel width in each direction

正確答案: A

問題4

When calculating an SM to AP ratio for a PMP site, which of the following should be considered (select TWO)?

A. The authentication methods required

B. The encryption methods required

C. Level of service guarantees

D. The power requirements for fully loaded AP

E. The type of data traffic

正確答案: C,E

問題5

When planning a FTP800 link using 2+0 configuration that utilizes maximum throughput, what impact will a single radio failure cause?

A. The FTP link will continue to operate, however, throughput will be full in one direction and cut in half in the opposite direction

B. The FTP link will continue to operate with no impact on throughput

C. The FTP link will continue to operate, however, throughput will be cut in half in both directions

D. The FTP link will fail and no traffic will be passed over the link

正確答案: C

問題6

What Simple Network Management Protocol (SNMP) version(s) would be applicable for implementation in a secure network environment where no passwords or IDs can be passed on the network in clear text?

A. SNMP v3 only

B. SNMP v2c and v3 are acceptable

C. SNMP v1, v2c, and v3 are acceptable

D. SNMP v2c only

E. SNMP v1 only

正確答案: A

問題7

The main function of an antenna is to:

A. add power to a signal,

B. direct radio energy in a desired direction.

C. protect transmitters from lightning.

D. decode radio signals into data traffic.

正確答案: B

問題8

A customer has a growing backhaul network using unlicensed OFDM radio links.
Increasing RF congestion in the area is causing problems with some of the links. What long-term strategy can be used to allow continued growth and reliability for the customer?

A. Add 2+0 configuration to existing links and any new deployed backhauls

B. Replace problem OFDM links with unlicensed FSK links and use unlicensed FSK links for all new deployments

C. Replace antennas on problem links with narrow beam-width antennas and use narrow beam-width antennas on all future links

D. Replace problem links with licensed links and use licensed links for all new deployments

正確答案: D

問題9

When designing a FTP system link, what is the Backhaul Timing Master?

A. An ODU used in a point-to-point link which selects the modulation technique for the link

B. An ODU providing the clock reference to the PTP-SYNC where a GPS timing source is not available

C. A module that provides power, GPS timing and network connections for the link

D. A module capable of transporting up to three Tl or two El voice lines onto a FTP link

正確答案: B

最新的Motorola Solutions Design Point (PTP and PMP) Solutions - MSC-111免費考試真題

聯系我們

站內鏈接

最新更新