最新的API API-936免費考試真題

問題1

If the refractory lining is required before pressure testing, all pressure-retaining welds shall:

A. be lined with coal tar epoxy.

B. include additional anchors.

C. remain unlined and exposed to test medium.

D. be gunned with no needles.

正確答案: C

說明：（僅 Fast2test 成員可見）

問題2

For qualification testing, test panels for pneumatic gunning are inclined at a:

A. 60° angle above the horizontal.

B. 90° angle above the horizontal.

C. 30° angle above the horizontal.

D. 45° angle above the horizontal.

正確答案: D

說明：（僅 Fast2test 成員可見）

問題3

Cold wall refractory lined components shall be dried out by heating from:

A. inside an oven.

B. the outside the steel shell.

C. the cold face only.

D. the hot face only.

正確答案: D

說明：（僅 Fast2test 成員可見）

問題4

Materials that are easily reduced to a granular or powdery condition after placement are known as:

A. calcined frits.

B. friable materials.

C. mineral additives.

D. granular grog.

正確答案: B

說明：（僅 Fast2test 成員可見）

問題5

According to API 936, test specimens are required to be held at oven dry temperature for how many hours?

A. 3

B. 1

C. 12

D. 5

正確答案: C

說明：（僅 Fast2test 成員可見）

問題6

When is metal fiber reinforcement used in castable refractory?

A. Only when specified by the owner

B. Only when added in the field

C. For all monolithic hot face castable refractory materials

D. Only when extra strength is required

正確答案: A

說明：（僅 Fast2test 成員可見）

問題7

Which party or individual is responsible for submitting a dryout procedure for a new lining?

A. Refractory manufacturer

B. Contractor

C. Dry-out company

D. Inspection company

正確答案: B

說明：（僅 Fast2test 成員可見）

問題8

Testing to verify that the application equipment and personnel are capable of meeting specified quality standards is called:

A. material qualification testing.

B. as-installed testing.

C. quality control testing.

D. applicator qualification testing.

正確答案: D

說明：（僅 Fast2test 成員可見）

問題9

For the qualification of the applicator/installer, they shall demonstrate their ability to install the refractory:

A. to meet the specified quality standards utilized for the installation of work.

B. free of visible voids, laminations on the hot face or working surface only for gunned lining.

C. by using the technique prescribed by the manufacturer no matter which material is used.

D. free of visible voids, laminations on the hot face or working surface only of the refractory lining.

正確答案: A

說明：（僅 Fast2test 成員可見）

最新的API Refractory Personnel - API-936免費考試真題

聯系我們

站內鏈接

最新更新