最新的Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) - 350-601免費考試真題
What is the impact of updating the firmware packages of a service profile that is associated to a Cisco B-Series server if no maintenance policy is configured on the service profile?
正確答案: A
說明：（僅 Fast2test 成員可見）
An engineer must configure monitoring on a Cisco MDS 9000 Series Switch for a critical interface prone to sporadic data traffic surges. A Remote Network Monitoring alarm must be configured to sample the number of incoming octets on the critical interface every 300 seconds and must be triggered if the traffic exceeds a certain threshold. Which command must be run?
正確答案: C
說明：（僅 Fast2test 成員可見）
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model. Which technology should be used to accomplish this goal?
正確答案: C
說明：（僅 Fast2test 成員可見）
Drag and Drop Question
A network engineer must perform a standard ISSU in an end-of-row switch with two supervisors.
The upgrade must be executed using the default parallel method. Drag and drop the options from the left into the sequence on the right to describe the parallel method upgrade for the switch modules.
A network engineer must perform a standard ISSU in an end-of-row switch with two supervisors.
The upgrade must be executed using the default parallel method. Drag and drop the options from the left into the sequence on the right to describe the parallel method upgrade for the switch modules.
正確答案:
Explanation:
Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 7.x
...
Performing Standard ISSU on End-of-Row (EoR) Switches with Two Supervisors Cisco Nexus 9500 Series switches are the modular EoR switches that require two supervisors for ISSU. The minimum configuration required is two system controllers and two fabric modules.
Cisco Nexus 9500 Series switches support parallel upgrade as the default method. The parallel method upgrades the modules in the batches (as outlined in the following illustration) instead of upgrading the modules one after the other.
Figure 1. Parallel Upgrade Process for Cisco Nexus 9500 Series Switches
The steps for the parallel upgrade process on Cisco Nexus 9500 Series switches are:
First the supervisors are upgraded (This procedure requires a switchover). Then the line cards, the fabric modules, the system controllers, and the FEX are upgraded.
After the switchover is performed in a parallel upgrade, the secondary supervisor takes over. The installer determines the current line cards and the fabric modules.
The installer then divides the components into the buckets. It places the first half of the line cards in the first bucket, the first half of the fabric modules in the second bucket, the second half of line cards in the third bucket, the second half of the fabric modules in the fourth bucket, the first system controller in the fifth bucket, and the second system controller in the sixth bucket.
Each bucket is upgraded successfully before an upgrade process starts for the next bucket.
The console displays the modules with the bucket assignments and the status of the upgrade.
The user also has the option to choose a serial upgrade using the CLI. ...
Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7- x/upgrade/guide/b_Cisco_Nexus_9000_Series_NX- OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NX- OS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html
In a Cisco SAN fabric, UCS fabric interconnects and blades are all monitored by Cisco DCNM.
The requirement is for the Cisco UCS manager to be monitored by Cisco DCNM. Which two configuration steps accomplish this goal? (Choose two.)
The requirement is for the Cisco UCS manager to be monitored by Cisco DCNM. Which two configuration steps accomplish this goal? (Choose two.)
正確答案: A,D
說明：（僅 Fast2test 成員可見）
An engineer must migrate the Cisco UCS Manager configuration from an old system to a new one. The requirement is to migrate only the configuration of the servers, and use different network and administration settings. Which backup type meets the requirements?
正確答案: C
說明：（僅 Fast2test 成員可見）
Refer to the exhibit. A storage engineer must monitor the traffic from the file server to the FC analyzer. The file server and the database use the same storage array.
Which configuration must be applied to the Cisco MDS 9000 Series Switch to accomplish this goal?
Which configuration must be applied to the Cisco MDS 9000 Series Switch to accomplish this goal?
正確答案: C
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment.
Which two policies must be configured to meet these requirements? (Choose two.)
Which two policies must be configured to meet these requirements? (Choose two.)
正確答案: C,D
說明：（僅 Fast2test 成員可見）
Overlay Transport Virtualization (OTV) provides an overlay that enables Layer 2 connectivity between separate Layer 2 domains, while keeping these domains independent and preserving the fault isolation, resiliency, and load-balancing benefits of an IP-based interconnection.
Which statements are true about OTV Adjacency Server? (Choose two.)
Which statements are true about OTV Adjacency Server? (Choose two.)
正確答案: A,B
A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog. Which solution meets these requirements?
正確答案: B
說明：（僅 Fast2test 成員可見）
A network engineer an EPLD update on the fan modules of a Cisco Nexus 7000 series switch.
What is the impact if "y is selected to continue?
What is the impact if "y is selected to continue?
正確答案: D
說明：（僅 Fast2test 成員可見）
Host1 is in VLAN100 located in DataCenter1 and Host2 is in VLAN200 located in DataCenter2.
Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?
正確答案: C
說明：（僅 Fast2test 成員可見）